MSI MS6334 (815M Pro) Motherboard Memory Upgrade

Give your MSI MS6334 (815M Pro) a performance boost by increasing its memory. With extra memory, you will also be able to run multiple applications at the same time.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable MSI MS6334 (815M Pro) system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your MSI MS6334 (815M Pro) motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

MSI MS6334 (815M Pro) Motherboard Specs:

• 168-pin DIMM Banking: 3 (3 banks of 1)
• Chipset: Intel 815E
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 4X
• Max Unbuffered SDR SDRAM: 512MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC100 and PC133
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your MS6334 (815M Pro):

256MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

MSI MS6334 (815M Pro) Memory FAQ

What does PC100 and PC133 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the MSI MS6334 (815M Pro) motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your MSI MS6334 (815M Pro), you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your MSI MS6334 (815M Pro) motherboard.