MSI MS6330 V5.0 (K7T Turbo2) Motherboard Memory Upgrade

Boost the performance of your MSI MS6330 V5.0 (K7T Turbo2) computer by upgrading its memory. With more memory, you can also enjoy running multiple applications simultaneously.

Avoid fatal exception errors, stop messages and random reboots by investing in quality memory for your MSI MS6330 V5.0 (K7T Turbo2). The computer memory upgrade choices listed here have been tested for quality and compatibility with your MSI MS6330 V5.0 (K7T Turbo2) motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

MSI MS6330 V5.0 (K7T Turbo2) Motherboard Specs:

• Chipset: VIA Apollo KT133A
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 4X
• Max Unbuffered SDR SDRAM: 1536MB
• Module Types Supported: Unbuffered only
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your MS6330 V5.0 (K7T Turbo2):

512MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 64Meg x 64

512MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 64Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

MSI MS6330 V5.0 (K7T Turbo2) Memory FAQ

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the MSI MS6330 V5.0 (K7T Turbo2) motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your MSI MS6330 V5.0 (K7T Turbo2), you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your MSI MS6330 V5.0 (K7T Turbo2) motherboard.