Jetway 830CN Ultra Motherboard Memory Upgrade

Boost the performance of your Jetway 830CN Ultra computer by upgrading its memory. With more memory, you will also be able to run multiple applications simultaneously.

Avoid fatal exception errors, stop messages and random reboots by investing in quality memory for your Jetway 830CN Ultra. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Jetway 830CN Ultra motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Jetway 830CN Ultra Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: SiS 730S
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 4X
• Max Unbuffered SDR SDRAM: 1024MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC100 and PC133
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your 830CN Ultra:

512MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 64Meg x 64

512MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 64Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

Jetway 830CN Ultra Memory FAQ

What does PC100 and PC133 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Jetway 830CN Ultra motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Jetway 830CN Ultra, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Jetway 830CN Ultra motherboard.