Jetway 720AFR2 Motherboard Memory Upgrade

Boost the performance of your Jetway 720AFR2 computer by increasing its memory. With extra memory, you will also be able to run multiple programs at the same time.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Jetway 720AFR2 system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Jetway 720AFR2 motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Jetway 720AFR2 Motherboard Specs:

• 168-pin DIMM Banking: 3 (3 banks of 1)
• Chipset: SiS 620/5595 (Eagle)
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 2X
• Max Unbuffered SDR SDRAM: 1536MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC100 and PC133
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your 720AFR2:

512MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 64Meg x 64

512MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 64Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

Jetway 720AFR2 Memory FAQ

What does PC100 and PC133 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Jetway 720AFR2 motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Jetway 720AFR2, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Jetway 720AFR2 motherboard.