Jetway 530BF Motherboard Memory Upgrade

Boost the performance of your Jetway 530BF computer by increasing its memory. With more memory, you will also be able to run multiple applications simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Jetway 530BF system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Jetway 530BF motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Jetway 530BF Motherboard Specs:

• 168-pin DIMM Banking: 3 (3 banks of 1)
• Chipset: SiS 530 AGPset
• Error Detection Support: ECC and non-ECC
• Max Unbuffered SDR SDRAM: 768MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC100
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your 530BF:

256MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, ECC, 133MHz, 3.3V, 32Meg x 72

256MB SDRAM, PC100, CL=2, Unbuffered, ECC, 100MHz, 3.3V, 32Meg x 72

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, ECC, 100MHz, 3.3V, 16Meg x 72

Jetway 530BF Memory FAQ

What does PC100 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

Do I need ECC or non-ECC memory?

ECC memory contains error correction circuitry to correct and fix memory errors. If you are running the computer as a web server, database server or anything mission critical, then ECC memory is the way to go. On the other hand, memory errors are so rare that for typical home use, non-ECC memory is recommended. Non-ECC memory is also cheaper and faster.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Jetway 530BF motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Jetway 530BF, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Jetway 530BF motherboard.