Iwill PIILS Motherboard Memory Upgrade

Boost the performance of your Iwill PIILS computer by increasing its memory. Besides better performance, you will be able to have more programs running at the same time.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Iwill PIILS system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Iwill PIILS motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Iwill PIILS Motherboard Specs:

• 168-pin DIMM Banking: 4 (4 banks of 1)
• Chipset: Intel 440LX
• Error Detection Support: ECC and non-ECC
• Graphics Support: AGP 2X
• Max EDO: 1024MB
• Max Unbuffered SDR SDRAM: 512MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66
• Supported DRAM Types: EDO and SDR SDRAM
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your PIILS:

128MB SDRAM, PC66, CL=2, Unbuffered, Non-parity, 66MHz, 3.3V, 16Meg x 64

Iwill PIILS Memory FAQ

What does PC66 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

Do I need ECC or non-ECC memory?

ECC memory contains error correction circuitry to correct and fix memory errors. If you are running the computer as a web server, database server or anything mission critical, then ECC memory is the way to go. On the other hand, memory errors are so rare that for typical home use, non-ECC memory is recommended. Non-ECC memory is also cheaper and faster.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Iwill PIILS motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Iwill PIILS, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Iwill PIILS motherboard.