Intel GS810 Motherboard Memory Upgrade

Give your Intel GS810 a performance boost by increasing its memory. With extra memory, you can also enjoy running multiple programs simultaneously.

Avoid fatal exception errors, stop messages and random reboots by investing in quality memory for your Intel GS810. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Intel GS810 motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Intel GS810 Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: Intel 810
• Error Detection Support: Non-ECC only
• Max Unbuffered SDR SDRAM: 512MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66 and PC100
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your GS810:

256MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

Intel GS810 Memory FAQ

What does PC66 and PC100 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Intel GS810 motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Intel GS810, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Intel GS810 motherboard.