Intel FJ440ZX Motherboard Memory Upgrade

Boost the performance of your Intel FJ440ZX computer by upgrading its memory. With more memory, you will also be able to run multiple programs simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Intel FJ440ZX system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Intel FJ440ZX motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Intel FJ440ZX Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: Intel 440ZX
• Error Detection Support: Non-ECC only
• Max Unbuffered SDR SDRAM: 256MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66 and PC100
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your FJ440ZX:

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC66, CL=2, Unbuffered, Non-parity, 66MHz, 3.3V, 16Meg x 64

Intel FJ440ZX Memory FAQ

What does PC66 and PC100 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Intel FJ440ZX motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Intel FJ440ZX, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Intel FJ440ZX motherboard.