Intel CN430TX Motherboard Memory Upgrade

Give your Intel CN430TX a performance boost by upgrading its memory. With extra memory, you will also be able to run multiple programs simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Intel CN430TX system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Intel CN430TX motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Intel CN430TX Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: Intel 430TX
• Error Detection Support: Non-ECC only
• Max EDO: 256MB
• Max Unbuffered SDR SDRAM: 256MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66
• Supported DRAM Types: EDO and SDR SDRAM
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your CN430TX:

128MB SDRAM, PC66, CL=2, Unbuffered, Non-parity, 66MHz, 3.3V, 16Meg x 64

Intel CN430TX Memory FAQ

What does PC66 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Intel CN430TX motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Intel CN430TX, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Intel CN430TX motherboard.