Intel BP810 Motherboard Memory Upgrade

Boost the performance of your Intel BP810 computer by upgrading its memory. With more memory, you can also enjoy running multiple programs simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Intel BP810 system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Intel BP810 motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Intel BP810 Motherboard Specs:

• 168-pin DIMM Banking: 1 (1 bank of 1)
• Chipset: Intel 810
• Error Detection Support: Non-ECC only
• Max Unbuffered SDR SDRAM: 256MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC100
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your BP810:

256MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

Intel BP810 Memory FAQ

What does PC100 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Intel BP810 motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Intel BP810, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Intel BP810 motherboard.