Intel AN430TX Motherboard Memory Upgrade

Boost the performance of your Intel AN430TX computer by increasing its memory. With more memory, you can also enjoy running multiple applications simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Intel AN430TX system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Intel AN430TX motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Intel AN430TX Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: Intel 430TX
• Error Detection Support: Non-ECC only
• Max EDO: 256MB
• Max Unbuffered SDR SDRAM: 256MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66
• Supported DRAM Types: EDO and SDR SDRAM
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your AN430TX:

128MB SDRAM, PC66, CL=2, Unbuffered, Non-parity, 66MHz, 3.3V, 16Meg x 64

Intel AN430TX Memory FAQ

What does PC66 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Intel AN430TX motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Intel AN430TX, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Intel AN430TX motherboard.