GigaByte GA6IWFE Motherboard Memory Upgrade

Give your GigaByte GA6IWFE a performance boost by upgrading its memory. With more memory, you can also enjoy running multiple programs at the same time.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable GigaByte GA6IWFE system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your GigaByte GA6IWFE motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

GigaByte GA6IWFE Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: Intel 810E2
• Error Detection Support: Non-ECC only
• Max Unbuffered SDR SDRAM: 512MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66 and PC100
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your GA6IWFE:

256MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 32Meg x 64

256MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 32Meg x 64

128MB SDRAM, PC100, CL=2, Unbuffered, Non-parity, 100MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=3, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

128MB SDRAM, PC133, CL=2, Unbuffered, Non-parity, 133MHz, 3.3V, 16Meg x 64

GigaByte GA6IWFE Memory FAQ

What does PC66 and PC100 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the GigaByte GA6IWFE motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your GigaByte GA6IWFE, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your GigaByte GA6IWFE motherboard.