GigaByte GA6ETXDR Motherboard Memory Upgrade

Give your GigaByte GA6ETXDR a performance boost by upgrading its memory. Besides better performance, you will be able to have more applications running simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable GigaByte GA6ETXDR system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your GigaByte GA6ETXDR motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

GigaByte GA6ETXDR Motherboard Specs:

• 168-pin DIMM Banking: 4 (4 banks of 1)
• Chipset: ServerWorks ServerSet III LE
• Error Detection Support: ECC only
• Max Registered SDR SDRAM: 4096MB
• Module Types Supported: Registered only
• SDR SDRAM Frequencies: PC133
• Supported DRAM Types: SDR SDRAM only
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your GA6ETXDR:

1GB SDRAM, PC133, CL=3, Registered, ECC, 133MHz, 3.3V, 128Meg x 72

512MB SDRAM, PC133, CL=3, Registered, ECC, 133MHz, 3.3V, 64Meg x 72

256MB SDRAM, PC133, CL=3, Registered, ECC, 133MHz, 3.3V, 32Meg x 72

GigaByte GA6ETXDR Memory FAQ

What does PC133 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the GigaByte GA6ETXDR motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your GigaByte GA6ETXDR, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your GigaByte GA6ETXDR motherboard.