GigaByte GA6EMMP Motherboard Memory Upgrade

Boost the performance of your GigaByte GA6EMMP computer by upgrading its memory. With extra memory, you can also enjoy running multiple programs at the same time.

Avoid fatal exception errors, stop messages and random reboots by investing in quality memory for your GigaByte GA6EMMP. The computer memory upgrade choices listed here have been tested for quality and compatibility with your GigaByte GA6EMMP motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

GigaByte GA6EMMP Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: Intel 440EX
• Error Detection Support: Non-ECC only
• Max EDO: 256MB
• Max Unbuffered SDR SDRAM: 256MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66
• Supported DRAM Types: EDO and SDR SDRAM
• USB Support: 1.x Compliant

These 168-pin DIMM modules are compatible with your GA6EMMP:

128MB SDRAM, PC66, CL=2, Unbuffered, Non-parity, 66MHz, 3.3V, 16Meg x 64

GigaByte GA6EMMP Memory FAQ

What does PC66 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the GigaByte GA6EMMP motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your GigaByte GA6EMMP, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your GigaByte GA6EMMP motherboard.