ECS L4S5M Motherboard Memory Upgrade

Boost the performance of your ECS L4S5M computer by increasing its memory. With extra memory, you will also be able to run multiple programs simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable ECS L4S5M system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your ECS L4S5M motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

ECS L4S5M Motherboard Specs:

• 184-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: SiS 645 (XP4)
• DDR SDRAM Frequencies: PC1600, PC2100, and PC2700
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 4X
• Max Unbuffered DDR SDRAM: 2048MB
• Module Types Supported: Unbuffered only
• Supported DRAM Types: DDR SDRAM only
• USB Support: 1.x Compliant

These 184-pin DIMM modules are compatible with your L4S5M:

1GB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 128Meg x 64

1GB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 128Meg x 64

1GB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 128Meg x 64

512MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 64Meg x 64

512MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 64Meg x 64

512MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 64Meg x 64

256MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 32Meg x 64

256MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 32Meg x 64

256MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 32Meg x 64

128MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 16Meg x 64

128MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 16Meg x 64

128MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 16Meg x 64

ECS L4S5M Memory FAQ

What is DDR?

DDR stands for Double Data Rate and is an enhanced type of memory which allows data to be read on both the rising and the falling edge of the clock. It basically delivers more data in less time than the previous memory technologies. The ECS L4S5M uses DDR memory only.

What does PC1600, PC2100, and PC2700 mean?

The number is the throughput speed of the memory in megabytes per second. The speed you need depends on what the installed CPU supports. You can also run faster rated memory for future upgrading or overclocking.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the ECS L4S5M motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your ECS L4S5M, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your ECS L4S5M motherboard.