Biostar M7VIG Motherboard Memory Upgrade

Boost the performance of your Biostar M7VIG computer by increasing its memory. With more memory, you can also enjoy running multiple applications at the same time.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable Biostar M7VIG system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Biostar M7VIG motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Biostar M7VIG Motherboard Specs:

• 168-pin DIMM Banking: 2 (2 banks of 1)
• 184-pin DIMM Banking: 2 (2 banks of 1)
• Chipset: VIA ProSavageDDR KM266
• DDR SDRAM Frequencies: PC1600 and PC2100
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 4X
• Max Unbuffered DDR SDRAM: 1024MB
• Max Unbuffered SDR SDRAM: 1024MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC100 and PC133
• Supported DRAM Types: SDR SDRAM and DDR SDRAM
• USB Support: 1.x Compliant

These 184-pin DIMM modules are compatible with your M7VIG:

512MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 64Meg x 64

512MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 64Meg x 64

512MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 64Meg x 64

256MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 32Meg x 64

256MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 32Meg x 64

256MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 32Meg x 64

128MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 16Meg x 64

128MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 16Meg x 64

128MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 16Meg x 64

Biostar M7VIG Memory FAQ

What does PC1600 and PC2100 mean?

The number is the throughput speed of the memory in megabytes per second. The speed you need depends on what the installed CPU supports. You can also run faster rated memory for future upgrading or overclocking.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Biostar M7VIG motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Biostar M7VIG, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Biostar M7VIG motherboard.