Biostar M7VIBA Motherboard Memory Upgrade

Give your Biostar M7VIBA a performance boost by increasing its memory. With more memory, you can also enjoy running multiple applications at the same time.

Avoid fatal exception errors, stop messages and random reboots by investing in quality memory for your Biostar M7VIBA. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Biostar M7VIBA motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Biostar M7VIBA Motherboard Specs:

• 184-pin DIMM Banking: 4 (4 banks of 1)
• Chipset: VIA Apollo KT266A
• DDR SDRAM Frequencies: PC1600 and PC2100
• Error Detection Support: ECC and non-ECC
• Graphics Support: AGP 4X
• Max Unbuffered DDR SDRAM: 3072MB
• Module Types Supported: Unbuffered only
• Supported DRAM Types: DDR SDRAM only
• USB Support: 1.x Compliant

These 184-pin DIMM modules are compatible with your M7VIBA:

1GB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 128Meg x 64

1GB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 128Meg x 64

1GB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 128Meg x 64

512MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 64Meg x 64

512MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 64Meg x 64

512MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 64Meg x 64

512MB DDR PC3200, CL=3, UNBUFFERED, ECC, DDR400, 2.6V, 64Meg x 72

512MB DDR PC2700, CL=2.5, UNBUFFERED, ECC, DDR333, 2.5V, 64Meg x 72

512MB DDR PC2100, CL=2.5, UNBUFFERED, ECC, DDR266, 2.5V, 64Meg x 72

256MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 32Meg x 64

256MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 32Meg x 64

256MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 32Meg x 64

256MB DDR PC2700, CL=2.5, UNBUFFERED, ECC, DDR333, 2.5V, 32Meg x 72

256MB DDR PC3200, CL=3, UNBUFFERED, ECC, DDR400, 2.6V, 32Meg x 72

128MB DDR PC2100, CL=2.5, UNBUFFERED, NON-ECC, DDR266, 2.5V, 16Meg x 64

128MB DDR PC3200, CL=3, UNBUFFERED, NON-ECC, DDR400, 2.6V, 16Meg x 64

128MB DDR PC2700, CL=2.5, UNBUFFERED, NON-ECC, DDR333, 2.5V, 16Meg x 64

Biostar M7VIBA Memory FAQ

What is DDR?

DDR stands for Double Data Rate and is an enhanced type of memory which allows data to be read on both the rising and the falling edge of the clock. It basically delivers more data in less time than the previous memory technologies. The Biostar M7VIBA uses DDR memory only.

What does PC1600 and PC2100 mean?

The number is the throughput speed of the memory in megabytes per second. The speed you need depends on what the installed CPU supports. You can also run faster rated memory for future upgrading or overclocking.

Do I need ECC or non-ECC memory?

ECC memory contains error correction circuitry to correct and fix memory errors. If you are running the computer as a web server, database server or anything mission critical, then ECC memory is the way to go. On the other hand, memory errors are so rare that for typical home use, non-ECC memory is recommended. Non-ECC memory is also cheaper and faster.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Biostar M7VIBA motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Biostar M7VIBA, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Biostar M7VIBA motherboard.