Biostar M6TLC Motherboard Memory Upgrade

Give your Biostar M6TLC a performance boost by increasing its memory. With more memory, you will also be able to run multiple programs at the same time.

Avoid fatal exception errors, stop messages and random reboots by investing in quality memory for your Biostar M6TLC. The computer memory upgrade choices listed here have been tested for quality and compatibility with your Biostar M6TLC motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

Biostar M6TLC Motherboard Specs:

• 168-pin DIMM Banking: 3 (3 banks of 1)
• Chipset: Intel 440LX
• Error Detection Support: Non-ECC only
• Graphics Support: AGP 2X
• Max EDO: 768MB
• Max Unbuffered SDR SDRAM: 768MB
• Module Types Supported: Unbuffered only
• SDR SDRAM Frequencies: PC66
• Supported DRAM Types: EDO and SDR SDRAM

These 168-pin DIMM modules are compatible with your M6TLC:

128MB SDRAM, PC66, CL=2, Unbuffered, Non-parity, 66MHz, 3.3V, 16Meg x 64

Biostar M6TLC Memory FAQ

What does PC66 mean?

This is the front side bus (FSB) clock speed of the memory. It is okay to run faster rated memory even if the installed CPU uses a slower FSB.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the Biostar M6TLC motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your Biostar M6TLC, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your Biostar M6TLC motherboard.