ABIT AA8DuraMax Motherboard Memory Upgrade

Boost the performance of your ABIT AA8DuraMax computer by upgrading its memory. With extra memory, you will also be able to run multiple programs simultaneously.

Cheap memory is often the cause of random fatal exception errors, stop messages and reboots. Buy quality memory from here for a stable ABIT AA8DuraMax system. The computer memory upgrade choices listed here have been tested for quality and compatibility with your ABIT AA8DuraMax motherboard. In addition, you get a limited lifetime warranty and free technical support with your computer memory upgrade.

ABIT AA8DuraMax Motherboard Specs:

• 240-pin DIMM Banking: 4 (2 banks of 2)
• Chipset: Intel 925X
• DDR2 SDRAM Frequencies: PC2-3200 and PC2-4200
• Error Detection Support: Non-ECC only
• Graphics Support: PCI Express x16
• Max Unbuffered DDR2 SDRAM: 4096MB
• Module Types Supported: Unbuffered only
• Supported DRAM Types: DDR2 SDRAM only
• USB Support: 2.x Compliant

These 240-pin DIMM modules are compatible with your AA8DuraMax:

2GB kit (1GBx2) DDR2 PC2-3200, CL=3, UNBUFFERED, NON-ECC, DDR2-400, 1.8V, 128Meg x 64

2GB kit (1GBx2) DDR2 PC2-4200, CL=4, UNBUFFERED, NON-ECC, DDR2-533, 1.8V, 128Meg x 64

2GB kit (1GBx2) DDR2 PC2-5300, CL=5, UNBUFFERED, NON-ECC, DDR2-667, 1.8V, 128Meg x 64

1GB DDR2 PC2-3200, CL=3, UNBUFFERED, NON-ECC, DDR2-400, 1.8V, 128Meg x 64

1GB DDR2 PC2-4200, CL=4, UNBUFFERED, NON-ECC, DDR2-533, 1.8V, 128Meg x 64

1GB kit (512MBx2) DDR2 PC2-3200, CL=3, UNBUFFERED, NON-ECC, DDR2-400, 1.8V, 64Meg x 64

1GB kit (512MBx2) DDR2 PC2-4200, CL=4, UNBUFFERED, NON-ECC, DDR2-533, 1.8V, 64Meg x 64

1GB DDR2 PC2-5300, CL=5, UNBUFFERED, NON-ECC, DDR2-667, 1.8V, 128Meg x 64

1GB kit (512MBx2) DDR2 PC2-5300, CL=5, UNBUFFERED, NON-ECC, DDR2-667, 1.8V, 64Meg x 64

512MB DDR2 PC2-4200, CL=4, UNBUFFERED, NON-ECC, DDR2-533, 1.8V, 64Meg x 64

512MB DDR2 PC2-3200, CL=3, UNBUFFERED, NON-ECC, DDR2-400, 1.8V, 64Meg x 64

512MB kit (256MBx2) DDR2 PC2-4200, CL=4, UNBUFFERED, NON-ECC, DDR2-533, 1.8V, 32Meg x 64

512MB kit (256MBx2) DDR2 PC2-3200, CL=3, UNBUFFERED, NON-ECC, DDR2-400, 1.8V, 32Meg x 64

512MB DDR2 PC2-5300, CL=5, UNBUFFERED, NON-ECC, DDR2-667, 1.8V, 64Meg x 64

256MB DDR2 PC2-4200, CL=4, UNBUFFERED, NON-ECC, DDR2-533, 1.8V, 32Meg x 64

256MB DDR2 PC2-3200, CL=3, UNBUFFERED, NON-ECC, DDR2-400, 1.8V, 32Meg x 64

256MB DDR2 PC2-5300, CL=5, UNBUFFERED, NON-ECC, DDR2-667, 1.8V, 32Meg x 64

ABIT AA8DuraMax Memory FAQ

Can I use DDR memory?

No, only DDR2 memory can be used in the ABIT AA8DuraMax. DDR2 operates at a lower voltage. DDR2 also uses a different notch than DDR so you can cannot plug it into an incompatible bank.

What does PC2-3200 and PC2-4200 mean?

The number is the throughput speed of the memory in megabytes per second. The speed you need depends on what the installed CPU supports. You can also run faster rated memory for future upgrading or overclocking.

What does the CL number mean?

Column Address Strobe (CAS) Latency, or CL for short, specifies how many clock cycles the ABIT AA8DuraMax motherboard must wait before the memory module is ready to deliver the requested memory. The lower the CL number, the faster the access time.

However, the performance difference between CL=2 and CL=3 is so small that you will not notice any degradation in speed. Unless you are overclocking your ABIT AA8DuraMax, you do not need to worry about the CL rating. If you are overclocking, then going with a lower CL may help stabilize your ABIT AA8DuraMax motherboard.